The fit question starts with two measurements
The Pen Loop XL is a self-adhesive loop designed for thicker writing instruments. It measures 1.6 × 1.6 in. and has a 0.8 in. elastic loop. Those two figures answer most fit questions: the 0.8 in. loop sets the maximum pen barrel thickness, and the 1.6 × 1.6 in. adhesive patch determines how much flat space the loop needs inside your notebook.
Unlike a pen loop that is built into a cover, this is an add-on. You affix it to the inside back cover of your notebook. That means the notebook itself does not need a dedicated pen holder—it just needs a smooth, flat area on the inside back cover large enough for the 1.6 × 1.6 in. patch.
What the Pen Loop XL actually provides
- Pen Loop XL, Self-Adhesive: Self-adhesive, 1.6 × 1.6 in. patch with a 0.8 in. elastic loop The patch size tells you how much flat inside-cover space you need; the 0.8 in. loop tells you which pens will fit.

Pen Loop XL, Self-Adhesive - Pen Loop XL, Self-Adhesive: Designed for thicker writing instruments such as fountain pens, large-calibre ballpoints and XL markers This is the key difference from a standard pen loop, which is typically sized for slimmer pens.
- Pen Loop XL, Self-Adhesive: Affixes to the inside back cover of your notebook Placement matters for balance and for keeping the pen out of the way of your writing hand.
Pen Loop XL vs standard pen loop: what changes
The comparison comes down to pen thickness and footprint. The XL loop is built for thicker barrels, while a standard loop is intended for slimmer pens. The XL patch is also larger, so it needs more flat space on the inside cover. If your notebook has a narrow inside back cover or a curved spine, check that the 1.6 × 1.6 in. patch can sit flat before you commit.
- Pen compatibility: The XL loop has a 0.8 in. elastic opening and is described as suitable for thick pens, including fountain pens, large-calibre ballpoints and XL markers. A standard loop is not described that way in the supplied information.
- Adhesive footprint: The XL patch measures 1.6 × 1.6 in. A standard loop is typically smaller, so the XL needs a larger flat area on the inside back cover.
- Placement: Both are self-adhesive add-ons, but the XL is specifically described as affixing to the inside back cover. The larger patch makes a flat, smooth surface more important.
- Best for: Choose the XL if you regularly carry a fountain pen, a thick ballpoint or an XL marker. Choose a standard loop if your pens are slim and you want a smaller footprint.
Three checks before you attach it
- Measure your pen barrel: The loop opening is 0.8 in. If your pen barrel is thicker than that, it will not fit. If it is much thinner, the pen may feel loose—though the elastic may still hold it.
- Check the inside back cover: You need a flat area at least 1.6 × 1.6 in. Avoid curved or textured surfaces, which can prevent the adhesive from making full contact.
- Decide on placement: The product is designed for the inside back cover. Test the position with the pen in place before removing the adhesive backing, so the pen does not interfere with closing the notebook.
What the supplied information does not confirm
The product record does not include a list of specific notebook models that are compatible, nor does it state a maximum pen diameter beyond the 0.8 in. loop opening. It also does not provide surface-preparation steps or cure times for the adhesive. If you are unsure whether your notebook’s inside cover is suitable, treat the measurements above as your guide rather than assuming universal fit.
The Pen Loop XL is available in Black, Sage, Fox Red, Rising Sun and Forest Green. Color choice does not affect fit, but it lets you match or contrast with your notebook cover.

